Drone Detection and Neutralization System

Evaluates both its advanced RF and RADAR system outputs to ensure detection of all UAVs including  fully automated drones with a preloaded waypoint path. The system may automatically perform jamming or spoofing counter-measures against the detected targets.

Anti-Drone Radar System Key Features

  • 3D detection of mobile, low altitude air, land and sea targets with automatically tracking process.
  • Perform a frequency hopping scan. 
  • It classifies the detected targets.
  • It generates lateral angle, range, altitude, RCA, radial velocity, absolute velocity, course, Doppler width information for targets.
  • The radar will get its position information and able to calculate the coordinates of the target with the target’s information. Positions the target on the map.
  • Track While Scan (TWS) tracks target and analyzes the route.
  • Detects Drones/UAVs with RF spectrum
  • RF output power typical 250W.
  • 360° detection and suppression against multi-drone attacks
  • Detects horizontally a minimum from 1 km up to 8 km and vertically up to between 40 ° and 60°.
  • User-friendly interface.
  • Jamming ratio range at least 1:2, typical 1:5.
  • Spoofing in the GNSS bands.
  • Detects low-altitude UAV (Unmanned Aerial Vehicle) with rotating and fixed wings.
  • Detects wireless communication of the drone with its remote control.
  • Detects frequency bands UHF, S ve C
  • Jams frequency bands of remote control communications with hostile Drones/UAVs.
  • Jams autonomous flights based on GNSS (GPS(L1,L2,L5), GLONASS(G1,G2,G3), GALILEO(E1,E5a,E5b,E6), BEIDOU(B1,B2,B3)) frequency bands.
  • Spoofing in the GNSS bands.
  • Fake GNSS  signals generated by ILTER to block autonomous hostile flights.
  • Remove the threat from protected zone