Drone Detection and Neutralization System

The new member of the ILTER family, the J350 Drone Detection and Neutralization System capable of automatically detection, jamming and Spoofing of rotary or fixed-wing mini/micro UAVs with its RF sensors and integrated radar.

Key Features

  • Adjustable output power up to 800 Watt
  • Protocol-based detection technology up to 30 threats
  • RF and DF detection between 400 – 6000 MHz on 10 channels
  • Omni jamming and Spoofing from 400 to 6000 MHz on 12 channels
  • Directional jamming and spoofing on 11 channels from 400 to 6000 MHz
  • Jamming capability with 2 extra frequencies with a bandwidth of 150 MHz where desired between 400 – 8000 MHz
  • Automatic mode or manual mode
  • Centralized command control of all sensors and effectors
  • Setup in less than 5 minutes with a single operator
  • 24 hours non-stop operation in all weather conditions
  • Directional antenna technology
  • Command and Control Signals: Directional information up to 5 km and with 90 degree accuracy
  • Digital Video Signals: Directional information up to 2 km and 90 degree accuracy
  • Analog Video Signals: Directional information up to 10 km and with 90 degree accurac
  • Omni-directional antenna technology
  • Detection distance up to 5 km
  • Protocol-based detection between 400 – 6000 MHz range in 7 channels
  • Up to 30 real-time detections
  • 360° detection coverage
  • Phased Array Fire Doppler Radar / Surveillance and tracking
  • Detection Range:
    Micro UAV: 5.5 km
    Fixed Wing UAV: 10 km
    Mini UAV: 10 km
    Small UAV: 15-20 km
    Vehicle: 15-20 km
  • Detection Probability: 80% (in low scan mode)
  • 200 treble tracking capacity:
  • 2 sec. (30 RPM) / 4 sec. (15 RPM) update rate
  • Slotted waveguide antenna technology
  • X band operating frequency
  • Beam Type / Rotation Speed: Multiple Beam Beam / 1-30 Rp

Jamming System

  • Full digital control
  • 14 channels in the 400 – 8000 MHz range
  • Simultaneous jamming on one or more channels
  • Emergency one-touch jamming on all channels
  • Directional (Vertical: 60° Horizontal: 90°)
  • Co-directional (Vertical: 0-60° Horizontal: 360°)
  • User-defined GNSS signals generated by ILTER to jam autonomous hostile flights.

Spoofing

  • Jams autonomous flights based on GNSS (GPS(L1,L2,L5), GLONASS(G1,G2,G3), GALILEO(E1,E5a,E5b,E6), BEIDOU(B1,B2,B3)) frequency bands.
  • User-defined GNSS signals generated by ILTER to jam autonomous hostile flights.
  • Remove the threat from protected zone.

Key Features

  • User-friendly interface and touch screen
  • User authorization
  • Wireless connection between command and control center and ILTER
  • User-friendly GUI operation
  • Detailed log records
  • Central command and control capability of multiple ILTER systems
  • Update with remote connection